Use Recommendations
Surfaces to be sanitized must be cleaned and rinsed thoroughly before applying Q-SAN. Once surface is clean & rinsed apply Q-SAN at rate of 5 ml per litre (which is 1:200) of water via mister or trigger spray. After 5 minutes of contact time between Q-SAN and the surface the surface will then be considered as being sanitised and no further surface preparation is generally required.
It is standard practice to surfaces treated with diluted Q-SAN air dry over night before using again.
Hard, non-porous food contact surfaces, such as equipment and utensils, may be used following sanitation without a potable water rinse provided that Q-SAN is used strictly according to directions, and the surfaces are drained and dry prior to any food contact.
Once Q-SAN has been diluted to make a “ready-to-use” and the desired quantity used, the remaining solution must be discarded to the drain as solutions burn up rapidly and become ineffective when left to stand.
ALWAYS DISCARD MADE UP, DILUTED SOLUTIONS AFTER USE & USE A FRESH SOLUTION DAILY
Q-SAN is non-hazardous according to NOHSC criteria.
Avoid unnecessary contact with skin and eyes. Do not drink.
